DD-WRT Installation steps GV with Asterix integration

Go down

DD-WRT Installation steps GV with Asterix integration

Post  gvtricks on Tue Aug 11, 2009 12:18 am

DD-WRT Installation steps GV with Asterix integration

DD-WRT Installation
Install DD-WRT 2.4sp1 MEGA on your router

Enable JFFS:
1) Go to the Web Page-> Admin -> Enable JFFS
2) Click Apply
3) Wait a few seconds
4) Check Clean JFFS
5) Click SAVE (not apply)
6) Wait a few seconds
7) Reboot

[b]Enable CIFS[b]
Create a share on a server somewhere pc or linux box with samba
Mount the Share on DD-WRT in the Web interface
Admin->CIFS Automount
Enable
Fill in the parameters.
You can leave "Start Script" blank

Setup ipkg
Make a directory for ipkg (bug in dd-wrt)

Code:
mkdir -p /jffs/tmp/ipkg/lists
ipkg update
ipkg install kmod-loop
ipkg install kmod-ext2
insmod /jffs/lib/modules/2.4.30/loop.o
insmod /jffs/lib/modules/2.4.30/ext2.o
Do a lsmod to make sure ext2 and loop is loaded
If not, repeat the insmod commands above

Prep Partition File

1) create a file to make into an ext2 file system partition to be loop mounted

Code:
dd if=/dev/zero of=dd-wrt-opt.ext2 bs=1M count=200
* (where dd-wrt-opt.ext2 is the file and location mounted on your dd-wrt

2) Create a ext2 filesystem in the file you just created

Code:
echo y | mke2fs -L optware dd-wrt-opt.ext2
Mount the file as a loop filesystem

Code:
mount -o loop /tmp/smbshare/dd-wrt-opt.ext2 /opt
*remember to change /tmp/smbshare/dd-wrt-opt.ext to your path and file

Install Optware

Code:
wget »www.3iii.dk/linux/optware/optwar···ddwrt.sh -O - | tr -d '\r' > /tmp/optware-install.sh
sh /tmp/optware-install.sh
Install Asterisk

Code:
/opt/bin/ipkg-opt --tmp-dir /tmp install asterisk14
Install each or all of the following sets. Depending on what your ATA/softphone supports for codecs.

Code:
/opt/bin/ipkg-opt --tmp-dir /tmp install asterisk14-moh-freeplay-g729
/opt/bin/ipkg-opt --tmp-dir /tmp install asterisk14-core-sounds-en-g729
/opt/bin/ipkg-opt --tmp-dir /tmp install asterisk14-extra-sounds-en-g729

/opt/bin/ipkg-opt --tmp-dir /tmp install asterisk14-moh-freeplay-ulaw
/opt/bin/ipkg-opt --tmp-dir /tmp install asterisk14-core-sounds-en-ulaw
/opt/bin/ipkg-opt --tmp-dir /tmp install asterisk14-extra-sounds-en-ulaw
Install Python
Code:
/opt/bin/ipkg-opt --tmp-dir /tmp install python

Install Management Scripts

FIVN's collection of management scripts [fivn.com]. We are concerned with "3. Install Asterisk for DD-WRT"

Install optware startup scripts Commands->Command Shell.
Paste into the box and click "Save Startup"
* if you have an existing script, you'll have to figure out how you want to incorporate

Code:
#!/bin/sh

insmod /jffs/lib/modules/2.4.30/loop.o
insmod /jffs/lib/modules/2.4.30/ext2.o
mount -o loop /tmp/smbshare/dd-wrt-opt.ext2 /opt

# Start all init scripts in /opt/etc/init.d
# executing them in numerical order.
#
for i in /opt/etc/init.d/S??* ; do

# Ignore dangling symlinks (if any).
[ ! -f "$i" ] && continue

case "$i" in
*.sh)
# Source shell script for speed.
(
trap - INT QUIT TSTP
set start
. $i
)
;;
*)
# No sh extension, so fork subprocess.
$i start
;;
esac
done
Asterisk Startup scripts
Code:
Install startup scripts

mkdir -p /opt/etc/init.d
cd /opt/etc/init.d
wget »www.fivn.com/scripts/S50asterisk
wget »www.fivn.com/scripts/S51astadmin
chmod 755 S50asterisk S51astadmin
Install Asterisk Management script tmp
mv tmp asterisk.sh
chmod 755 asterisk.sh
Reboot

Asterisk Web Interface Location would be:
Code:
»/user/cgi-bin/asterisk.sh

Asterisk Configuration:

I cheated and just copied the files from a PiaF install on Virtualbox. Install and configure as normal.
Then copy the following files over to /opt/etc/asterisk

Code:
extensions.conf
extensions_additional.conf
extensions_custom.conf
extensions_override_freepbx.conf
features.conf
features_applicationmap_additional.conf
features_applicationmap_custom.conf
features_featuremap_additional.conf
features_featuremap_custom.conf
features_general_additional.conf
features_general_custom.conf
globals_custom.conf
sip.conf
sip_additional.conf
sip_custom.conf
sip_custom_post.conf
sip_general_additional.conf
sip_general_custom.conf
sip_nat.conf
sip_registrations.conf
sip_registrations_custom.conf
pygoogle Integration
Grab the install-gv-new script from:
Code:
wget »bestof.nerdvittles.com/applicati···l-gv-new
Patch it with the following diff

Save the patch as gv.patch

Code:
patch install-gv-new > /etc/asterisk/extensions_custom.conf
-echo "[custom-gv]" >> /etc/asterisk/extensions_custom.conf
-echo "exten => _X.,1,Wait(1)" >> /etc/asterisk/extensions_custom.conf
-echo "exten => _X.,n,Set(ACCTNAME=$acctname)" >> /etc/asterisk/extensions_custom.conf
-echo "exten => _X.,n,Set(ACCTPASS=$acctpass)" >> /etc/asterisk/extensions_custom.conf
-echo "exten => _X.,n,Set(RINGBACK=$ringback)" >> /etc/asterisk/extensions_custom.conf
-echo "exten => _X.,n,Set(CALLPARK=$callpark)" >> /etc/asterisk/extensions_custom.conf
-echo "exten => _X.,n,Playback(pls-wait-connect-call)" >> /etc/asterisk/extensions_custom.conf
-echo "exten => _X.,n,System(gvoice -e \${ACCTNAME} -p \${ACCTPASS} call \${EXTEN} \${RINGBACK})" >> /etc/asterisk/extensions_custom.conf
-echo "exten => _X.,n,Set(PARKINGEXTEN=\${CALLPARK})" >> /etc/asterisk/extensions_custom.conf
-echo "exten => _X.,n,Park()" >> /etc/asterisk/extensions_custom.conf
-echo " " >> /etc/asterisk/extensions_custom.conf
-echo "[custom-park]" >> /etc/asterisk/extensions_custom.conf
-echo "exten => s,1,Wait(4)" >> /etc/asterisk/extensions_custom.conf
-echo "exten => s,2,Set(GVNUM=$gvnum)" >> /etc/asterisk/extensions_custom.conf

-echo "exten => s,3,Set(CALLPARK=$callpark)" >> /etc/asterisk/extensions_custom.conf
-echo "exten => s,4,NoOp(**CALLERID: \${CALLERID(number)})" >> /etc/asterisk/extensions_custom.conf
-echo 'exten => s,5,GotoIf($["${CALLERID(number)}"="${GVNUM}"]?6:7)' >> /etc/asterisk/extensions_custom.conf
-echo "exten => s,6,ParkedCall(\${CALLPARK})" >> /etc/asterisk/extensions_custom.conf
-echo "exten => s,7,Goto(from-trunk,gv-incoming,1)" >> /etc/asterisk/extensions_custom.conf
-echo " " >> /etc/asterisk/extensions_custom.conf
+echo " " >> /opt/etc/asterisk/extensions_custom.conf
+echo "[custom-gv]" >> /opt/etc/asterisk/extensions_custom.conf
+echo "exten => _X.,1,Wait(1)" >> /opt/etc/asterisk/extensions_custom.conf
+echo "exten => _X.,n,Set(ACCTNAME=$acctname)" >> /opt/etc/asterisk/extensions_custom.conf
+echo "exten => _X.,n,Set(ACCTPASS=$acctpass)" >> /opt/etc/asterisk/extensions_custom.conf
+echo "exten => _X.,n,Set(RINGBACK=$ringback)" >> /opt/etc/asterisk/extensions_custom.conf
+echo "exten => _X.,n,Set(CALLPARK=$callpark)" >> /opt/etc/asterisk/extensions_custom.conf
+echo "exten => _X.,n,Playback(pls-wait-connect-call)" >> /opt/etc/asterisk/extensions_custom.conf
+echo "exten => _X.,n,System(/opt/local/bin/gvoice -e \${ACCTNAME} -p \${ACCTPASS} call \${EXTEN} \${RINGBACK})" >> /opt/etc/asterisk/extensions_custom.conf
+echo "exten => _X.,n,Set(PARKINGEXTEN=\${CALLPARK})" >> /opt/etc/asterisk/extensions_custom.conf
+echo "exten => _X.,n,Park()" >> /opt/etc/asterisk/extensions_custom.conf
+echo " " >> /opt/etc/asterisk/extensions_custom.conf
+echo "[custom-park]" >> /opt/etc/asterisk/extensions_custom.conf
+echo "exten => s,1,Wait(2)" >> /opt/etc/asterisk/extensions_custom.conf
+echo "exten => s,2,Set(GVNUM=$gvnum)" >> /opt/etc/asterisk/extensions_custom.conf
+echo "exten => s,3,Set(CALLPARK=$callpark)" >> /opt/etc/asterisk/extensions_custom.conf
+echo "exten => s,4,NoOp(**CALLERID: \${CALLERID(number)})" >> /opt/etc/asterisk/extensions_custom.conf
+echo 'exten => s,5,GotoIf($["${CALLERID(number)}"="${GVNUM}"]?6:7)' >> /opt/etc/asterisk/extensions_custom.conf
+echo "exten => s,6,ParkedCall(\${CALLPARK})" >> /opt/etc/asterisk/extensions_custom.conf
+echo "exten => s,7,Goto(from-trunk,gv-incoming,1)" >> /opt/etc/asterisk/extensions_custom.conf
+echo " " >> /opt/etc/asterisk/extensions_custom.conf

echo "Reloading Asterisk dialplan..."
-asterisk -rx "dialplan reload"
+/opt/sbin/asterisk -rx "dialplan reload"
echo " "

if [ -e "/usr/bin/gvoice" ]
@@ -71,20 +71,23 @@
echo "Installing Python add-ons..."
cd /root
#yum install mercurial
-yum -y install python-setuptools
-easy_install simplejson
+#/opt/bin/ipkg-opt --tmp-dir /tmp install py25-setuptools
+#yum -y install python-setuptools
+#easy_install simplejson
+/opt/bin/ipkg-opt --tmp-dir /tmp install py25-simplejson
#hg clone »https://pygooglevoice.googlecode.com/hg/ pygooglevoice

echo " "
echo "Installing pygooglevoice..."

wget »bestof.nerdvittles.com/applicati···oice.tgz
+cd /tmp
tar zxvf pygooglevoice.tgz

cd pygooglevoice
-python setup.py install
+/opt/bin/python setup.py install

-sed -i 's| help(|# help(|' /usr/bin/gvoice
+sed -i 's| help(|# help(|' /opt/local/bin/gvoice

fi
Fire Up Asterisk
/opt/etc/S50asterisk stop
/opt/etc/S50asterisk start

You should now have a working Asterisk Server with GV integration

I am not the one who developed these scripts.I just copied and paste the information from some blogs.
Thanks

gvtricks

Posts : 11
Join date : 2009-07-27

View user profile

Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum